Technical specifications
Type
2.0 channel wireless speaker
Maximum power output (RMS)
10W
DC input
Micro-USB DC 5V
DC output
USB 5V/1A
Visual e ects
Five lighting modes
Speaker
Driver unit
38mm
Maximum power output (RMS)
10W (5W per channel)
Frequency
20Hz-20kHz
Impedance
4
Sensitivity
83dB
Signal to noise ratio
85dB
Microphone
Directivity
Omnidirectional
Frequency
1kHz
Impedance
≤2.2k
Sensitivity
-42dB
Connectivity
Connection type
Wireless, NFC, micro-SD
Audio output
Yes
Memory card slot
Yes (micro-SD
USB port
Yes
Wireless RF frequency
2.4GHz-2.480GHz
Wireless range
≥10m
Battery
Battery type
4,400mAh, lithium ion
Battery charging time
7-10 hours
Battery run time
3.5-10 hours
Battery standby time
>30 hours (With LEDs o )
Battery charging method
Micro-USB
General
Dimensions
7.1x3.1x3.1in
Weight
24.9oz
Cable length
3.5mm cable: 39.3in
Charging cable: 35.4in
Warranty
One year
Device
and 3.5mm
TM
)
TM
FCC statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician
for help.