Festo BWL-HSP Serie Manual Del Usuario página 17

1. Fit the support for the waiting position on the relevant
link side of the HSP-...
– type BWL-... left-hand side
– type BWR-... right-hand side.
2. Fasten the support with two cheese-head screws 1
– on the HSP-...-12 from above
– on the HSP-...-16/25 at the side.
Replacing the cylinder
3. Push the cylinder upright, from above onto the
support.
4. When using the protective cover of the HSP-...:
position the pneumatic connections on the rear.
5. Fasten the cylinder with two cheese-head screws 2.
Please note
Make sure that the cylinder is fitted free of distortion.
S Observe the specified tightening torques.
S Tighten the screws equally in alternate sequence.
S After fitting, check manually to make sure that the
piston rod can be moved easily and smoothly.
Festo BWL-/BWR-HSP-... 1403a English 17