Specifications - Philips Pronto RFX6500 Guia Del Usuario

The specifications and design of this product are subject to change without notice.
Hardware Blaster unit
Hardware Receiver unit
Dimensions Blaster unit
Dimensions Receiver unit
Dimensions antenna
Operating temperature
Infrared (IR)
Radio Frequency (RF)
Dual IR emitters
Power adapter
Accessories
User Guide
17

Specifications

Red LED (continuously on when powered, blinking
during IR emission)
16 IDs and 4 CHs
4 outputs for IR emitters
Input for Receiver unit
Possibility of having multiple RF extenders in one
home not interfering
Positioning: freestanding, mounted horizontally or
hanging up side down
Red LED (blinking when receiving RF commands and
RF interference)
Output for Blaster unit
RF antenna
4.5 x 3.2 x 1.1 inch (112.9 x 81.2 x 26.8 mm)
3.0 x 2.9 x 0.9 inch (77 x 73 x 23.5 mm)
Extended: 0.7 inch (17.7 mm)
Retracted: 0.4 inch (9.7 mm)
Fully rotatable (360°)
32°F to 122°F (0°C to 50°C)
Operating distance: 16.4 ft – 22.9 ft (5-7 meters)
IR frequency range: DC/flash codes, 25kHz-100kHz
Operating distance: 147.6 ft (45 m) outdoor
Number of IR emitters : up to 8 (4x2), emitters wired in
series
3.5 mm mono mini-plug
Cable length: 10 ft (2.5 meters)
Min. range: 3 ft (75 cm)
RFX 6500: 120V / 60 Hz AC Power adapter
(400mA/12V DC adapter, UL-approved)
SBC LI910: 230V / 50 Hz AC Power adapter
(400mA/12V DC adapter, CE-approved)
Connection cable (standard shielded stereo audio
cable, 2.5 mm male jacks on both sides, up to
20 ft / 6 m)
Dual IR emitters
Power adapter
Mounting kit (Plate and screws)