Rowenta Actisteam DZ2060 Manual Del Usuario página 6

Selecting the Temperature
Ironing label
Steam Ironing
WARNING !
Never iron or steam clothes while they are being worn.
Before ironing for the first time fill iron and allow to heat.
The iron should be allowed to emit steam for 1 to 2 minutes
while pressing the burst of steam button a few times to remove
any impurities. This should also be done if iron is not used
regularly.
Set the temperature control dial according to the
fabric you are ironing. Check the garment label for
appropriate setting.
We recommend using the chart below as a guide.
Fabric
Synthetic fibres e.g.
viscose, silk, polyester
wool
cotton, linen
Variable steam
Maximum steam setting should only be used when
the iron is set to the highest temperature setting
(• • • ). Steam will be produced when iron is used
horizontally.
Burst of steam
This feature is ideal for removing stubborn wrinkles
or pressing in sharp creases in horizontal use.
When the temperature control is set to the steam
zone (after • • ) the burst of steam can be used by
pressing the burst of steam button.
Leave an interval of 4 seconds between bursts.
Temperature
6
control