Seac X-LED Manual De Usuario página 7

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

IntroductIon
Congratulations for having chosen the quality and reliability of
a SEACSUB product. The equipment you have purchased was
made with selected and tested materials. Development and
constant research allow us to evolve continually. Innovative
manufacturing processes, constant controls and testing, as
well as testing under real conditions guarantee the reliability
that all SEACSUB products are known for.
 WARNING
Read this entire manual before using this equipment!
This manual must be retained for as long as you own the
product!
generAl InforMAtIon.
- Before using the Led torch you must be familiar with all the
safety regulations. Follow the indications in the instruction
manual carefully and obey pertinent national and local laws;
those concerning the minimum age limit for using this product,
proper conduct during its use and transport, the areas where
it is allowed, and warning devices, etc. The inappropriate
use of underwater equipment may be dangerous and cause
damage to objects or personal injury.
- During the assembly and finishing of the Led torch, all possible
provisions were made to supply a highly reliable, long-lasting
product. Such provisions may become ineffective if the user
does not use the Led torch correctly and does not maintain it
adequately.
- SEACSUB S.p.A. denies any responsibility for any problem
resulting from a lack of observation of the recommendations
made in this manual.
- For any other eventuality, please contact your authorized
SEACSUB dealer or SEACSUB directly. In order to guarantee
maximum safety, every repair or maintenance intervention
must be carried out only by authorized SEACSUB workshops.
 WARNING
Follow the rules below to avoid problems and prevent risk
of damage to objects and personal injury.
On the surface
- Before using the torch, read this entire manual very carefully.
- Current regulations require that batteries must be removed
from the torch before being brought on board aircraft.
- We strongly recommend checking the state of the batteries
before use.
- Do not insert batteries that present deformations to the
casing or loss of liquid.
- Avoid keeping the torch turned on out of the water for
extensive periods of time.
- Do not aim the light directly into your eyes or other people's
eyes, either on the surface or underwater.
- Keep the torch in a temperate environment, avoiding storage
in excessively damp or hot environments.
- Avoid leaving the torch in direct sunlight or in environments
with temperatures above 50°C.
- In case of extensive storage and disuse, it is advisable to
remove the batteries.
- Do not unscrew the head of the torch if it is still wet.
- Check that the switch is in the blocked position to avoid
inadvertent switching on during transport.
- Extensive use out of the water and subsequent dives may
cause damage to the device.
- The autonomy declared in the technical specification depends
on the quality and state of the batteries used. Please check
that the Alkaline batteries (inserted in the correct position)
are suitable and of reasonable quality.
4362-SEAC-X5-LED.indd 7
Underwater use
- Never, for any reason, point the light into someone's eyes
during underwater dives.
- Do not unscrew the head of the torch while diving.
- In case of accidental loss, remember that the torch has negative
buoyancy and therefore, if dropped, will fall downwards.
- While diving, check that there is not a constant stream of air
bubbles escaping from the torch. If there are such bubbles, turn
the torch off and when safely possible, return to the surface.
- Consult a diving instructor to familiarize yourself with
international light signals for communications.
- Do not use the torch as a means of sound signaling. Repeated
blows may permanently damage internal components.
- Check that the torch is firmly attached to the diver with the
fastener provided.
- The fastener provided is fixed to a loop connected to the rear
of the torch. Always check the connection and the state of
the fastener in order to avoid loss of equipment.
IntroductIon
And technIcAl specIfIcAtIons.
The X-LED/X5-LED torch is a result of research conducted
in close collaboration with numerous professional diving
operators. The innovative characteristics guarantee a reliability
that remains unchanged over time. At the same time, the
mechanical and functional aspects allow an extremely simple
maintenance regime.
This new torch joins high, long-lasting performance, light quality,
and reliability to meet the needs of divers and diving centers.
The strongpoint of the LED system lies in high-quality luminosity
with an autonomy that, in most cases, is four times that of the
average autonomy for torches with halogen bulbs. The efficiency
and the excellent quality of LED guarantee a lifespan of 50,000
hours, eliminating the need for a periodic replacement of the
torch itself.
The characteristic white light allows a realistic perception of
colors while diving, adding further significant motivation to the
dive itself.
The manageability and the practicality, due to the reduced
size and anatomical form, allow the diver to keep the torch in
various points of the jacket (including pockets), without being
bulky, while the elastic band provided guarantees the perfect
connection between the diver and the torch.
Another practical advantage can be found in the use of 1,5 V
Alkaline batteries that are readily available. It is possible to
replace the batteries anywhere without having to find non-
standard formats or electrical power sources for recharging.
All the components are of high quality and specially designed for
intense diving activity. This is the reason why we recommend
the X-LED/X5-LED torch to diving centers where a single
recharging with new batteries will allow multiple dives to be
carried out.
The switch-on knob allows the use of the X-LED/X5-LED Torch
even with thick gloves where a sure grip is required. The
switch on the knob offers safe transport without the risk of
inadvertently switching on the torch.
A thermal protection system does not allow the LED to be
switched on if the torch has been exposed to temperatures
above 50°C. As soon as the temperature is lowered, the
system will begin working normally.
 WARNING
The X5LED version has been set up with an intelligent
worn battery warning system: only two of the five LEDs
will stay on at maximum power to warn the user that the
batteries are low. This means that even the longest dive
can be completed safely, knowing that the batteries will
require replacing.
italiano
7
20/06/2011 17:46:47
Tabla de contenido
loading

Este manual también es adecuado para:

X5-led

Tabla de contenido