Scan Modes; Normal Channel Scan - Maxon SP-200 Serie Manual De Operación

Status Indicators and Audible Alert Tones
STATUS
Normal
Scanning
Scan Edit
Priority
Edit
Warning
Error
NOTE: All audible tones can be programmed "off" for silent operation.

Scan Modes

Scanning is a Dealer programmable feature that allows you to monitor a
number of channels or channels within a Group. Your Dealer will help you
define a scanning mode and your channel "scan list" .

Normal Channel Scan

Once the scan list has been established, initiate scan by pressing and
releasing the scan button, (first button below the P-T-T bar).
If a conversation is detected on any of the channels in the scan list, the radio
will stop on that channel and you will be able to hear the conversation. If
programmed for normal scan TX, you will be able to transmit on that active
channel during the programmable scan delay time. (The scan delay time
DESCRIPTION
Power On - Ready
Call Received
Correct Call
Busy Channel
Transmit
Transmit Not Allowed
Normal Scan Mode
Priority Scan Mode
Priority Look Back
Scan Mode
Edit Scan List
Edit Priority Channel
Low Battery
Busy Channel Lockout
TX Inhibit
Time-Out-Timer
EEPROM
Unlock
LED COLOR LCD INDICATION
N/ A 188
Orange Channel Number
Green Channel Number
Orange Channel Number
Red Channel Number
Red Flashing Alternating UL /
Channel Number
Green Flashing Group Number
Green Flashing N/A
Green Flashing PS/Channel
number
Red Single Flash SE
Red Two Flashes PE
Red Flashing LC
Orange bL
N/A _h/rO
N/A Pt
N/A Er
N/A UL
7
AUDIBLE TONE
Melody
N/ A
N/ A
N/ A
N/ A
Two Beeps Repeated
N/ A
N/ A
N/ A
N/ A
N/ A
3 Beeps Repeated
Single Beep Repeated
Two Beeps
Single Beep / 3 Beeps
Repeated
Single Beep Repeated
Two Beeps Repeated