Qualified Operators - Industrial Air IAD Serie Manual De Mantenimiento Y Operacion

Operate the unit after it is properly installed in the
recommended position;
Do not start the unit without the protecting covers
properly in place;
Do not remove the protecting elements while the unit
is functioning;
Do not remove the protecting elements when the unit
is switched on;
MAT Industries, LLC shall not be held responsible for any possible damage caused,
directly or indirectly, by persons or elements following non-compliance with these
Any assembling/removal carried out by THE USER, which is not provided for in this
manual or not authorised by "MAT Industries, LLC", will be considered as an inappropriate
operation, thereby damaging safety functions, and will lead to the cancellation of the

QUALIFIED OPERATORS

Only the professionals stated below are authorized to
operate the unit after having received all the necessary
instructions from this manual:
Specialized maintenance electrician
The electrician should have a general knowledge about
electrical appliances as well as specific experience
working with control boxes and the electrical components
of cooling units or similar equipment from the domain of
air-conditioning.
The electrician is authorized to carry out only the specific
operations stated in this manual by meticulously following
the associated instructions.
Maintenance technician
The maintenance technician should have a general
experience working with mechanical elements and a
specific experience with
equipment from the domain of air-conditioning.
The maintenance technician is authorized to carry out
only the specific operations stated in this manual by
meticulously following the associated instructions.
Refrigeration technician
The refrigeration technician should be a refrigeration
certified from a technical institution for similar equipment
or interventions under the authority of competent
personnel.
The refrigeration technician is authorized to carry out only
the specific operations stated in this manual by
meticulously following the associated instructions.
instructions.
warranty.
cooling units or similar
Do not clean the unit when it is in operation;
Do not install the unit in corrosive or explosive
places;
Do not disconnect or remove the safety devices and
parts;
It is prohibited to operate the unit under conditions
other than those specified in this manual.
Transport operator
The transport operator can carry out only the specific
operations stated in this manual by meticulously following
the associated instructions.
Staff allocated for the start-up and shut-down
of the unit
(Basic operator and engineer operator)
After having understood the information contained in this
manual, the basic operator will be authorized to manually
operate the unit at the level of the following functions:
start-up, shut-down, display of alarms.
In this case, this operator can carry out only the specific
operations stated in this manual by meticulously following
the associated instructions.
Safety officer
The safety officer is responsible for protection and the
prevention of occupational risks as set forth in OSHA
Directive (Safety in the workplace).
The safety officer shall make certain that all the persons
who operate the unit have received all applicable
instructions which are contained in this manual, including
the initial installation and commissioning operations.
5