Binks 183G-500 Manual De Instrucciones página 2

In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as follows:
WARNING
!
Hazards or unsafe practices which could
result in severe personal injury, death or
substantial property damage.
READ THE MANUAL
Before operating finishing equipment, read and understand all
safety, operation and maintenance information provided in the
operation manual.
OPERATOR TRAINING
All personnel must be trained before operating finishing
equipment.
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equip ment to rupture,
malfunction, or start unexpectedly and result in serious injury.
DE-ENERGIZE, DEPRESSURIZE, DISCONNECT AND LOCK OUT ALL
POWER SOURCES DURING MAINTENANCE
Failure to De-energize, disconnect and lock out all power
supplies before performing equipment maintenance could cause
serious injury or death.
HIGH PRESSURE CONSIDERATION
High pressure can cause serious injury. Relieve all pressure before
servicing. Spray from the spray gun, hose leaks, or ruptured
components can inject fluid into your body and cause extremely
serious injury.
PRESSURE RELIEF PROCEDURE
Always follow the pressure relief procedure in the equipment
instruction manual.
KEEP EQUIPMENT GUARDS IN PLACE
Do not operate the equipment if the safety devices have been
removed.
AUTOMATIC EQUIPMENT
Automatic equipment may start suddenly without warning.
INSPECT THE EQUIPMENT DAILY
Inspect the equipment for worn or broken parts on a daily basis.
Do not operate the equipment if you are uncertain about its
condition.
NEVER MODIFY THE EQUIPMENT
Do not modify the equipment unless the manufacturer provides
written approval.
KNOW WHERE AND HOW TO SHUT OFF THE EQUIPMENT IN CASE
OF AN EMERGENCY
STATIC CHARGE
Fluid may develop a static charge that must be dissipated through
proper grounding of the equipment, objects to be sprayed and all
other electrically conductive objects in the dispensing area. Improper
grounding or sparks can cause a hazardous condition and result in
fire, explosion or electric shock and other serious injury.
WEAR SAFETY GLASSES
Failure to wear safety glasses with side shields could result in
serious eye injury or blindness.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE OPERATOR OF THE EQUIPMENT.
FOR FURTHER SAFETY INFORMATION REGARDING BINKS AND DEVILBISS EQUIPMENT, SEE THE
2
CAUTION
!
Hazards or unsafe practices which could
result in minor personal injury, product
or property damage.
Warning
!
Read the following warnings before using this equipment.
GENERAL EQUIPMENT SAFETY BOOKLET (77-5300).
Important installation, operation or
maintenance information.
GET IMMEDIATE MEDICAL ATTENTION
To prevent contact with the fluid, please note the following:
a) Never point the gun/valve at anyone or any part of the body.
b) Never put hand or fingers over the spray tip.
c) Never attempt to stop or deflect fluid leaks with your hand,
body, glove or rag.
d) Always have the tip guard on the spray gun before spraying.
e) Always ensure that the gun trigger safety operates before
spraying.
f) Always lock the gun trigger safety when you stop spraying.
MEDICAL ALERT
Any injury caused by high pressure liquid can be serious. If you are
injured or even suspect an injury:
a) Go to an emergency room immediately.
b) Tell the doctor you suspect an injection injury.
c) Show the doctor this medical information or the medical alert
card provided with your airless spray equipment.
d) Tell the doctor what kind of fluid you were spraying or
dispensing.
e) Refer to the Material Safety Data Sheet for specific
information.
WEAR RESPIRATOR
Toxic fumes can cause serious injury or death if inhaled. Wear a
respirator as recommended by the fluid and solvent
manufacturer's Material Safety Data Sheet.
TOxIC FLUID & FUMES
Hazardous fluid or toxic fumes can cause serious injury or death if
splashed in the eyes or on the skin, inhaled, injected or swallowed.
LEARN and KNOW the specific hazards or the fluids you are using.
FIRE AND ExPLOSION HAZARD
Improper equipment grounding, poor ventilation, open flame or
sparks can cause hazardous conditions and result in fire or
explosion and serious injury.
PROjECTILE HAZARD
You may be injured by venting liquids or gases that are released
under pressure, or flying debris.
ELECTRIC SHOCK / GROUNDING
Improper grounding or sparks can cause a hazardous condition
and result in fire, explosion or electric shock and other serious
injury.
PINCH POINT HAZARD
Moving parts can crush and cut. Pinch points are basically any
areas where there are moving parts.
NOISE HAZARD
You may be injured by loud noise. Hearing protection may be
required when using this equipment.
PROP 65 WARNING
CA PROP
WARNING: This product contains chemicals known to the
65
State of California to cause cancer and birth defects or other
reproductive harm.
NOTE