Idiomas disponibles
Idiomas disponibles
IF YOUR PRODUCT IS SURFACE MOUNTED FOLLOW THE FOLLOWING
INSTRUCTIONS:
1. Check that your product contains all the parts: trim, fixing ring, 2 fixing
spring screws, 4 surface fastening screws and 4 plugs.
2. Take the attachment ring and place it on the surface where the product
will be installed.
3. HMark the 4 holes and drill them. Place the fixing ring on the surface by
screwing it into the 4 holes.
4. Remove the springs and screw the appliance to the bezel with the 2 small
screws provided.
5. Proceed with the connection of the appliance (SEE INSTALLATION INSTRUC-
TIONS).
6. Place the fitting in the fixing ring, inserting it into the marks (and when case
of the circular, turn the appliance).
3/4
