Mobile Phone - Sound ID 300 Guía De Inicio Rápido Y Manual Del Usuario

Pair Your Sound ID 300 with Your Bluetooth
You must pair your headset with your mobile phone before it will work.
Consult your phone manual for pairing instructions for your specific
phone model. In general, here's how:
1. Turn OFF the headset if it is on. Turn ON the phone and navigate to
"Bluetooth Link".
2. Press and hold down the Main Button on the Sound ID 300 for eight
seconds until the light flashes red and green. Note: the Sound ID 300
is automatically placed in pairing mode with the LED flashing red and
green each time it is powered on until successfully paired.
3. Select LOOK FOR DEVICES on the mobile phone, and then select
"Sound ID 300" when it appears on the menu screen.
4. If asked to pair, select YES.
5. If asked for a pin, passcode, or passkey, enter "0000".
6. After successfully pairing, the Sound ID 300 status light will stop
flashing and the device will remain ON.
4

Mobile Phone

®