5. MI-MMU16 UHF PLL HAND-HELD TRANSMITTER
54- Power: Push to turn the transmitter on. When the transmitter is on, push and hold for 2 seconds
to turn it off.
55- Mute: While the transmitter is on, switch Mute up to talk and down to mute. If the transmitter is
off, switch the Mute up to turn the unit on. The transmitter turns itself off automatically after 1,
10 or 30 minutes of muting depending on setting.
56- Ultrasonic receiving unit: It receives pairing signals from the ultrasonic transmission unit at the
receiver end.
57- Battery holder: It holds AA 1.5 V battery or rechargeable battery x 2.
58- LED indicator: It shows the transmitter's status, including battery level, mute and pairing
indication.
59- LCD display: It shows the parameter settings in the transmitter.
60- SET: It allows parameter settings, including frequency, group, channel, sensitivity, transmission
power and auto off countdown.
61- ▲/▼: these are used with "SET" to change the parameter settings.
62- PUSH and hold the "LOCK" button for 2 seconds to lock the buttons. Push and hold again for 2
seconds to unlock.
63- Charging contact: If rechargeable batteries are used, this microphone can be recharged with an
optional charger.
MI SERIES Version 1.2
MI Series
Wireless system
Page 7 of 27