Mi-Rd2Cu16 Uhf Pll Dual-Channel Diversity Receiver - Optimus MI Serie Manual De Instalación Y Funcionamiento

4. MI-RD2CU16 UHF PLL DUAL-CHANNEL DIVERSITY RECEIVER

1- POWER: I means "ON" and O means "OFF".
2- SET: This is for function settings. Push and hold for 2 seconds to enter the setting mode. Push
"SET" repeatedly to search for the function you wish to set.
3- ▲/▼In the setting mode, push▲/▼to change the function parameter. In the non-setting mode:
push▲/▼to adjust volume.
4- LCD display.
5- Lock: Push and hold "Lock" for 2 seconds to lock the buttons in order to prevent pushing any
button by accident.
6- Remoset U: This allows user to synchronize the transmitter after modifying a parameter. Push
"REMOSET U" to synchronize the settings to the transmitter.
7- Remoset indicator: This shows the current pairing status. It flashes rapidly when data is being
transmitted and the flashing stops when the synchronization is completed. However, the
flashing slows down if synchronization fails after a period of time of pairing attempt.
8- Ultrasonic transmission unit: It transmits digital pairing data at ultrasonic frequency. When
setting, direct the ultrasonic receiving element of the transmitter to the ultrasonic transmitting
unit of the receivers. The effective range is 30º on both sides with the optimized distance at 30
cm.
33- Female BNC antenna port: the 50 Ω BNC antenna is connected here. It also provides a booster
power of 12~15 V DC / 100 mA for an external antenna booster.
MI SERIES Version 1.2
MI Series
Wireless system
Page 5 of 27