Wireless Dmx Linking; Wireless Configuration; Starting Address - Chauvet Freedom Centerpiece Guía De Referencia Rápida

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
Mode
Wireless On/Off
Wireless Setting
Wireless Channel
IR Setting
White Balance
Dimmer Mode
Back Light
Information
Factory Reset

Wireless DMX Linking

The Freedom Centerpiece does not have DMX input or output, but can work with a DMX controller using D-Fi Hub or
FlareCON Air products.

Wireless Configuration

The Freedom Centerpiece can be operated in wireless mode. For more information about configuring this product to transmit or
receive in wireless mode, download the Freedom Centerpiece User Manual from the Chauvet website.

Starting Address

To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 497.
You can wirelessly sync an unlimited amount of receivers to one transmitter. To ensure strong signals, the units
should remain in an unobstructed line of sight of each other.
IRC-6 (Infrared Remote Control)
The Freedom Centerpiece can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the Freedom Centerpiece User Manual from www.chauvetdj.com.
Freedom Centerpiece QRG Rev. 3
QUICK REFERENCE GUIDE
Programming Levels
Wireless Mode
On
Off
Off
Manual
Off
Dimmer 1
Dimmer 2
Dimmer 3
10S
30S
2Mins
Always On
Fixture Hours
Version
No
Yes
Freedom Centerpiece sends
wireless DMX signal to other
wireless products.
Description
On
Turns wireless capability on or off
Off
Transmit
Set to transmitter or receiver channel
Receive
CH01–CH16
Select the wireless channel
Turns infrared on or off
Turn off the white balance
R
G
Select red, green, blue, and white to set the white
125–255
balance
B
W
No dimming effect
Sets the dimming speed, fast to slow
Turns off after 10 seconds
Turns off after 30 seconds
Turns off after 2 minutes
Does not turn off
9999H
Displays the total operating hours of the device
V0.2
Shows installed software version
Resets to factory settings
EN
4
Tabla de contenido
loading

Tabla de contenido