Dmx Linking - Chauvet DJ 4Bar LT USB Guía De Referencia Rápida

Menu Map
MODE
Dmx Mode
Preset Colors
Automatic Pro-
grams
Speed
Sound-Active
Sound Sensitivity
RGB Color Mixing
Infrared Mode

DMX Linking

The 4Bar LT USB can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX or dip switch configuration, download the DMX Primer
from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in DMX mode, the highest recommended DMX address is 512.
Master/Slave Connection
The 4Bar LT USB uses the DMX data connection for its Master/Slave made. Instructions for connecting and configuring
this product for Master/Slave operation are in the User Manual.
IRC-6 (Infrared Remote Control)
The 4Bar LT USB is fully compatible with the Infrared Remote Control (IRC-6) from CHAUVET® DJ For more information
on the IRC-6 or to download instructions, go to www.chauvetlighting.com.
D-Fi USB Connectivity
The 4Bar LT USB is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ.
Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation
are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual display control/
menu buttons and IRC-6 will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
4BAR LT USB QRG Rev. 2
QUICK REFERENCE GUIDE
PROGRAMMING LEVELS
3-CH
15CH
C--
Auto
S--
Snd
Sens
U--
Set
DESCRIPTION
d1-d512 Set the DMX starting address
Selects one of the preset colors (red,
C 1-C 7 green, blue, cyan, magenta, yellow, or
white)
Turns on Auto mode
Adjusts the speed of the automatic
S 1-S100
programs (fast to slow)
The internal program runs to the beat of
the music
Turns on and adjusts the sensitivity of
u 1-u100
the Sound active mode (low to high)
r 0-r100
Adjust the red, green, and blue levels to
g 0-g100
create a custom color
b 0-b100
ON
Turns on Infrared mode for IRC-6 remote
use
OFF
EN
4