Electrical Connection - CASO DESIGN AF300 Manual De Instrucciones

3.6 Electrical connection

caso AF300
 To operate correctly, the appliance requires sufficient air
flow. Leave at least 10 centimeters (4 inches) of space on all
sides when setting up the appliance.
 Do not move the Air Fryer when it is in operation.
 The electrical outlet must be easily accessible so that the
plug can be quickly disconnected in the case of an
emergency.
 The setup of this appliance in non-stationary locations (e.g.,
boats, airplanes, motor homes) must be carried out by a
qualified electrician, provided they guarantee the
prerequisites for the safe use of the appliance.
 The appliance is not suitable to be installed in an area where
water may spray.
In order to ensure the safe and trouble-free operation of the
appliance, the following instructions must be observed for the
electrical connection:
 Before plugging in the appliance, compare the voltage and
frequency data on the Air Fryer's rating plate (found on the
bottom of the appliance) with that of your electrical network.
This data must be compatible. If in doubt consult a qualified
electrician.
 The use of a multi-plug outlet adapter is not recommended
due to fire danger.
 Inspect the power cord for damage and ensure it doesn't run
under the appliance or over hot or sharp surfaces.
 The electrical safety of the appliance is only guaranteed if it
is connected to a properly installed protective conductor
system. Operations using an electrical outlet without a
protective conductor are prohibited. If in doubt, have the
house installation checked by a qualified electrician. The
manufacturer cannot be made responsible for damages that
are caused by a missing or damaged protective conductor.
 Make sure you always use a grounded wall socket to
connect the appliance.
 This appliance may not be used through an external timer or
by means of a remote control.
16