Trouble Shooting - Charmglow 810-2320-B Manual Del Propietário

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INS_810_2320_B_Charmglow-new.qxd

TROUBLE SHOOTING

P r o b l e m :
Burner will not light
Fire at control knob
Yellow Flames at burner
Flame blows out on "LOW"
Burner does not get hot enough
Grill is Too Hot
17
10/6/04
5:22 PM
Page 19
Possible Causes:
1 . Check LP cylinder fuel level.
2 . Bad electrode spark.
Check to see if the grill will match light.
Electrode or collector may need adjustment.
3 . Burner may not be properly seated.
4 . Burner may be obstructed.
5 . The cylinder valve may be closed.
6 . Regulator is not properly seated on cylinder valve.
1 . Burner holes may be obstructed. See section on
"Burner Assembly/Maintenance" under Proper Care
and Maintenance.
2 . Burner is improperly seated on control valve.
3 . Gas connections may be loose.
Leak Check and tighten all connections.
1 . Burner is obstructed. See section on
"Burner Assembly/Maintenance" under Proper Care
and Maintenance.
1 . Burner holes may be obstructed. See section on
"Burner Assembly/Maintenance" under Proper Care
and Maintenance.
2 . Grill is not sufficiently preheated.
3 . Burner is improperly seated on control valve.
1 . Flow control device has been activated in regulator.
See Regulator Resetting Procedure under
Connecting LP Cylinder and Hose/Regulator to Grill.
1 . Excess grease build-up causing grease fires.
2 . Damaged or faulty regulator.
Replace with factory authorized parts.
3 . Cook on a lower temperature setting.

Capítulos

Tabla de contenido
loading

Tabla de contenido