04-900 Assembly; Rev - RPB RADEX 04-900 Manual Del Usuario

04-900 ASSEMBLY

FIGURE 2.1
To assembly the pressure regulator, thread
the pressure gauge into the body and tighten.
FIGURE 2.3
Fit the complete regulator assembly onto the
top of the Radex Airline Filter lid.
WARNING! The pressure relief valve must be connected to protect the Radex
Airline Filter from over pressurizing.
8
RADEX AIRLINE FILTER
FIGURE 2.2
Connect the quick disconnect coupler
and brass cap to the 3/8" tee into the top
of the pressure regulator and tighten. It is
recommended that the regulator assembly
is tightened before mounting onto the Radex
Airline Filter. Use thread sealant on all
fittings.
FIGURE 2.4
Once the regulator assembly has been
tightened onto position you can fit the
pressure relief valve and tighten.