RPB RADEX 04-900 Manual Del Usuario página 11

Thread the 04-916 Pressure Relief Valve into
the lid and tighten.
SUPER HIGH FLOW REGULATOR ASSEMBLY
FIGURE 4.6
Thread the 04-915 Pressure Gauge and
04-966 1"NPT Connector into the 04-962
Super High Flow Regulator and tighten.
Check ALL fittings and connections are tight. YOUR FILTER IS NOW READY FOR USE.
NOTE
FIGURE 4.5
If the Pressure Gauge on the Super High
Flow Regulator and the Pressure Gauge on
the Manifold are reading more than 10psi
apart, your cartridge is blocked and needs
replacing.
Refer to your respirator instruction manual for
pressure ranges for your respirators, increase
the pressure according to the number of
operators.
FIGURE 4.7
Now thread the complete Regulator
into the INPUT port on the body of the
Radex Filter Unit and tighten.
®
11