Communications And Monitoring - Bornay WIND+ Manual De Instrucciones

Communications and monitoring

The regulator provides several options for communication with the outside.
At the present time, the following peripherals are in place:
- USB port.
- RS232 communications port.
- 2 RS485 communications ports.
- Bluetooth (Optional). It is necessary to install the Bornay
Bluetooth adaptor.
All these forms of communication work under the MODBUS standard.
for interconnection within the system, there is a software application called
Bornay Monitor.
The communications tubing is always in accordance with the MODBUS RTU.
A specific MODBUS communications manual is available.
The following are the parameters of the USB communication:
 115200 Baud.
 8 data bits.
 No parity.

1 stop bit.
 Modus RTU type
 Response time: 1000ms or higher.
 Delay between readings: 100ms.
 All data are of the type Uint16.
 For reading the registers, function F3 (Read holding registers).
 For writing the registers, functions F6 (Write single register) and F16
(Write multiple registers).
57