Operation - Bornay WIND+ Manual De Instrucciones

Operation

The operation of the regulator is very simple.
The unit takes the three-phase AC power from the wind turbine and
transforms it into direct current, suitable for charging batteries. At the same
time, it is constantly controlling the rotational speed of the turbine, thus
keeping it from going out of control at all times.
In order to control the rotations of the turbine, the regulator has a braking
resistor inside from which it derives power if it should be necessary.
The regulator has a single input of the three-phase AC type and an outlet in
direct current.
The regulator includes an automatic control system that keeps the wind
turbine always under control. The turbine will be kept working with MPPT
whenever it is possible.
The regulator will stop the wind turbine completely if any of the following
situations is produced:
- Physical activation of the regulator´s emergency stop (Red
button)
- Activation of the brake from the screen of the regulator.
- Activation of the brake from the Modbus command. Battery
charged.
- Maximum rotations exceeded.
- High wind.
- Detection of any possible error:
o
o
o
Internal temperature exceeded.
Excess current.
Excess voltage.
44