Disposal And Recycling; Ordering Spare Parts - EINHELL 34.140.24 Manual De Instrucciones Original

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
4. Assembly
4.1 Joining the feet to the connecting struts
(Fig. 3)
Use the fastening screws (6) to fi t the two connec-
ting struts (4 and 5) to the prepared points of the
feet (3).
4.2 Fastening the garage to the ground
(Fig. 4)
Pass the fastening screws (10) through the prepa-
red holes in the feet (3) and tighten them with the
hex key (9) to fasten the feet (3) in the ground.
If the ground is hard or dry, the fastening screws
(10) may break when being screwed in. Water the
lawn before installing the robot lawn mower gara-
ge if the ground is very dry.
4.3 Mounting and fastening the guard hood
Place the guard hood (1) on the feet (3) and fi t the
two fastening pins (8) with the nuts (7) (Fig. 5/6).
You can attach the hex key to the side of the foot
(Fig. 7) for storage. Close the locks (2) for stability.
(Fig. 8)

5. Ordering spare parts:

Please provide the following information on all
orders for spare parts:
Type of unit
Article number of the unit
ID number of the unit
Spare part number of the required spare part
For the latest prices and information go to www.
Einhell-Service.com
Anl_Maehroboter_Garage_SPK9.indb 10
Anl_Maehroboter_Garage_SPK9.indb 10
GB

6. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the Einhell Germany
AG.
Subject to technical changes
- 10 -
24.09.2020 09:40:09
24.09.2020 09:40:09
Tabla de contenido
loading

Tabla de contenido