Technical Data - Proxxon MicroClick MC 2 Manual Del Usario

Translation of the Original
Operating Instructions
MicroClick MC 10
Dear Customer,
The use of these instructions
• makes it easier to become acquainted with your
MicroClick MC 10 torque screwdriver,
• will help prevent malfunctions and possible injuries
due to improper handling and
• will increase the service life of your MicroClick MC
10 torque screwdriver.
Please read these instructions fully and carefully be-
fore using the MicroClick MC 10 and make sure that
you have completely understood the explanations
and instructions stated herein. In particular, please
comply with the safety notes! If you have any further
questions, contact our central service for more in-
formation. The address is printed on the last page
of these instructions. This will ensure you enjoy the
accurate and reliable functions of your MC 10 torque
screwdriver for a long time.
Always keep these instructions close to hand!
PROXXON will not be liable for the safe function of
the device for:
• handling that does not comply with the usual and
intended use,
• other application uses that are not stated in the in-
structions,
• disregard of the safety regulations.
Please understand that for
• operating errors,
• damage caused by improper use, and
• lack of maintenance
we must refuse any warranty claims and any further
liability.
Technical Description:
With the MC 10 you have acquired a high-quality
torque screwdriver from the „PROXXON MicroClick"
series. You now have a reliable precision instrument
with DIN/ISO 6789, Type II/Class D accuracy, ideal
for a variety of possible application ranges which de-
pend on the delicate and controlled tightening of
screws and nuts with smaller torques. The required
torque can be set with the infinitely variable adjust-
ing ring at the back end of the tool.
- 6 -
1/4" square drive and adapter in handle to fit a T-bar.
The ergonomically designed shaft permits you to
safely and comfortably hold the screwdriver even
during longer periods of work. And: Please note that
every tool is only as good as how the user handles
it! Therefore, always be careful when you work with
or do maintenance on the MicroClick MC 10.

Technical Data:

Model: Disengaging torque screwdriver
Length: approx. 185 mm
Weight: approx. 260 g
Square end drive: 1/4"
Measuring range: 2-10 Nm, infinitely adjustable
Accuracy: DIN ISO 6789, Type II, Class D
Legend (Fig. 1):
1. Bit holder
2. Shank
3. Torque scale
4. Adjusting ring
5. T-bar
Principles about your safety and on
proper use:
• Only use the torque screwdriver for its intend-
ed use! Improper use can cause damage to the
torque screwdriver or lead to personal injuries!
• Never overstress the torque screwdriver! This
could result in damage.
• Store the torque screwdriver in a dry area!
Moisture can cause corrosion and thus impair the
function and, above all, the accuracy!
• Avoid very high and very low temperatures!
This could also lead to disruptions in function.
• Protect the torque screwdriver from mechani-
cal effects such as impacts, etc. This could
result in damage to the sensitive and precise me-
chanics.
• Do not use the torque screwdriver as a normal
screwdriver to release and tighten screw con-
nections. Remember: The MicroClick MC 10 is a
precision instrument! Above all, please note: Nev-
er use the torque screwdriver to release tightened
or corroded screw connections!