Warranty Claims - Atlantic FF4216T Manual Del Producto

When plumbing multiple fixtures, run a main feed line along the back of the wall, teeing
up to the individual fixtures (Figure 8). If plumbing multiple fixtures, it is best to install a
ball valve in each line feeding the fixtures to provide more control over water flow. When
running more than three fixtures, the main feed line should be increased to at least 2". It is
recommended to build a drain plug into the manifold for winterization.
Figure 8
Drain Plug
Feed Line
Winterizing
In areas where freezing is a concern, the pump(s) must be removed from the basin before
freezing and stored in a dry place. Remove the drain plug (if installed) to drain the plumbing
for winter. If a drain plug is not installed, drain the water in the basin to below the bulkhead.
Using a wet/dry shop-vac, vacuum out the water lines and then insert a 1½"male threaded
plug into each bulkhead. This will keep the lines from refilling and freezing over the winter.
Warranty
This product carries a one-year warranty. This warranty is extended solely to the
original purchaser commencing from the date of original purchase receipt. A misused or
abused product voids this warranty.

Warranty Claims

In case of warranty claims, the complete Basin should be returned to the place of purchase
accompanied by original receipt.
6