1.
Power button. Press this button to turn on your computer.
2.
Secure Digital™ / MultiMediaCard slot. Insert a Secure Digital™ card or
MultiMediaCard into this slot.
3.
Optical disk drive bay. There is an optical disk drive in this bay.
4.
Hot Swap Bay (empty). Allows you to install an additional HDD in this bay.
5.
Power LED. This LED lights up when you turn on your computer.
6.
Memory Stick™ / Memory Stick Pro™ card slot. Insert a Memory Stick™ / Memory
Stick Pro™ card into this slot.
7.
CompactFlash
into this slot.
8.
OC Button. This button adjusts the System Level Up profile of your computer.
9.
USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0
devices such as a mouse, printer, scanner, camera, PDA, and others.
DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows
•
operating system.
• Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows
OS environment and after the USB 3.0 driver installation.
• USB 3.0 devices can only be used as data storage only.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
10.
USB 2.0 ports. These Universal Serial Bus .0 (USB .0) ports connect to USB .0
devices such as a mouse, printer, scanner, camera, PDA, and others.
11.
Microphone port. This port connects to a microphone.
12.
Headphone port. This port connects to a headphone or speaker.
1
/ Microdrive™ card slot. Insert a CompactFlash
®
/ Microdrive™ card
®
®
®
Chapter 1: Getting started