Install The Adapter And The Transition; Install Wood Mounting Strip; (Non-Ducted Inst. Only); Install 55633 Or 55643 Optional Decorative Flue - Kenmore PRO 233.56033 Manual De Uso Y Cuidado

INSTALL THE ADAPTER AND THE TRANSITION (IF NEED BE)
Using standard 3/8" screws
provided, secure the adapter
to the top (or back) of the
hood. Seal the adapter to the
hood using metal foil duct tape.
For round ducting, install an
appropriate sized transition and
seal the joints with metal foil
duct tape.
Measure and mark a level line on wall above cooktop
location for the wood mounting strip (see illustration
at right). Remove wood mounting strip from back of
hood. Use no. 10 - 2" fl at head screws to secure the
mounting strip to the drywall. Make sure to hit the wall studs.
CAUTION: Due to the weight of this hood, ensure
!
that the wood strip is attached to all of the available
studs (2 studs minimum for a 30" width hood, more
as hood width increases); not into the drywall alone.
INSTALL RECIRCULATION KIT 55673 OR 55683
Refer to the instructions sheet included with the recirculation kit for details.

INSTALL 55633 OR 55643 OPTIONAL DECORATIVE FLUE

Assemble both sides to the front using 4 no. 8 x 0.375" included screws.
B
Place the decorative flue cover on top on the range hood.
C
Secure the decorative flue cover to the top of the range hood using 6 no. 8 x 0.375" included screws.
D
1
x 4
HR0069A
HJ0013

INSTALL WOOD MOUNTING STRIP

2
HD0589A
1. Drywall
2. Wood mounting strip
5. Back of hood outline

(NON-DUCTED INST. ONLY)

(DUCTED INST. ONLY)

11
4. Wall anchor location
3. Flat head screw
6. Wall studs
3
x 6