Power Supply; Environmental Conditions - Seneca Z Serie Manual De Instrucciones

4.4 1500 V INSULATIONS
~
The isolation voltage between:

- power supply

- analog input
- analog output 1
- analog output 2
is (figure 1).
1500 V~
4.5 POWER SUPPLY
Supply voltage
Power-supply unit
Power consumption Min: 0.5 W; Max: 2 W
Install a 2.5 A -Max rated fuse near the module.
4.6 MODULE CASE
Box
Dimensions
Terminal board
Protection class

4.6 ENVIRONMENTAL CONDITIONS

Operating
temperature
Humidity
Max enviroment
pollution degree
Storage temperature -20°C – +85°C
4.7 STANDARDS
The module complies with the following standards:
-EN 61000-6-4 (electromagnetic emission, in industrial enviroment)
-EN 61000-6-2 (electromagnetic immunity, in industrial enviroment)
-EN 61010-1(safety).
One Max 2.5 A fuse must be installed near the module.
10 – 40 V or 19 – 28 V
~
terminals
Class 2
PBT, black
Width W = 100 mm, Height H = 112 mm, Depth D = 17.5 mm
Removable 3-way screw terminals: pitch 5.08 mm, section 2.5 mm
IP20 (International Protection)
-10°C – +60°C (UL: -10°C – +60°C)
30 – 90% to 40°C not condensing (during operation)
2 (during operation)
MI002282-E
OUT-V
OUT-
OUT 1
mA
1
(50Hz-60Hz), between 2 –3 screw
~
IN
OUT 2
Power
Supply
AC , DC
~
~
ENGLISH 4/16
RS 232
OUT-V
OUT-
mA
2