Okoru Global MasterSun MAXIM Manual De Instrucciones página 15

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

We recommend that the awning front bar has a height of at least 2.5 m when it
is fully extended –
if your conditions do not allow this you can mount the awning in lower position.
The horizontal centre line through the lower drilling holes must be 60 cm higher
than the axis of the front bar to meet the minimum tilt angle of 14°.
In the event you would like to mount it above a balcony door, you should leave
a space of at least 20 cm above the door frame if there is enough space
available above the door frame.
Figure 1:
When choosing mounting location you must take tilt angle into consideration.
We recommend that the awning front bar has a height of at least 2.5 m, total
drop A must be at least 0,60 m.
At a height of front bar at 2,50 height of centre line through lower drilling holes is
3.10 m.
Tabla de contenido
loading

Tabla de contenido