Troubleshooting - olythe OCIGO Instrucciones De Uso

CONTACTS
• For any information regarding calibration, warranty or
technical questions about your product, please contact
our technical support (see contact details on the back of
these instructions)

5. Troubleshooting

«Invalid breath » message and vibrates twice when
you blow into the device.
To make a correct measurement, the breath duration must
be sufficient to reach the minimum required air volume. It
is also possible that you may have blown too hard. The
application can guide you while you blow. Remember
to attach a new mouthpiece beforehand to ensure the
reliability of the new test.
"Wait » message when OCIGO sustains a sudden
movement.
In order to provide a correct measurement, the OCIGO
measurement system needs to be kept still. Therefore,
avoid violent jolts and sudden movements before
blowing.
OCIGO does not recharge while plugged in
OCIGO can only be recharged when the ambient
temperature is between 0°C and +40°C. Please wait until
the temperature drops below 40°C.
29