Hedge Trimmer Safety - GMC GPHC21 Manual Del Usuario

Electrical Chain Saw Safety
WARNING: Chainsaws are potentially dangerous machines which can cause major injury if used by
untrained people
WARNING: It is recommended that this tool is ALWAYS supplied via Residual Current Device (RCD)
with a rated residual current of 30mA or less.
• Keep all parts of the body away from the saw chain when the chainsaw is operating. Before
you start the chainsaw, make sure the saw chain is not contacting anything. A moment of
inattention while operating chainsaws may cause entanglement of your clothing or body with the
saw chain
• Always hold the chainsaw with your right hand on the rear handle and your left hand on
the front handle. Holding the chainsaw with a reversed hand configuration increases the risk of
personal injury and should never be done
• Wear safety glasses and hearing protection. Further protective equipment for head, hands,
legs and feet is recommended. Adequate protective clothing will reduce personal injury from
flying debris or accidental contact with the saw chain
• Do not operate a chainsaw in a tree. Operation of a chainsaw while in a tree may result in
personal injury
• Always keep proper footing and operate the chainsaw only when standing on fixed, secure
and level surface. Slippery or unstable surfaces such as ladders may cause a loss of balance or
control of the chainsaw
• Hold the power tool by insulated gripping surfaces only because the saw chain may
contact hidden wiring or its own cord. Saw chains contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the operator an electric shock
• When cutting a limb that is under tension, be alert for spring back. When the tension in the
wood fibres is released the spring loaded limb may strike the operator and/or throw the chainsaw
out of control
• Use extreme caution when cutting brush and saplings. The slender material may catch the
saw chain and be whipped toward you or pull you off balance
• Carry the chainsaw by the front handle with the chainsaw switched off and away from
your body. When transporting or storing the chainsaw always fit the guide bar cover.
Proper handling of the chainsaw will reduce the likelihood of accidental contact with the moving
saw chain
• Follow instructions for lubricating, chain tensioning and changing accessories. Improperly
tensioned or lubricated chain may either break or increase the chance for kickback
• Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery
causing loss of control.
• Cut wood only. Do not use chainsaw for purposes not intended. For example: do not use
chainsaw for cutting plastic, masonry or non-wood building materials. Use of the chainsaw
for operations different than intended could result in a hazardous situation
• DO NOT allow children or pets near the work area. Untrained bystanders are dangerous and
can cause distraction, when in the vicinity of an operational chainsaw
• Check that other people are a safe distance away from your work area before starting to
cut. When tree felling, all other people should be a minimum distance equal to twice the height
of the tree away
• DO NOT work alone. Always ensure that there is someone nearby to help in the event of an
emergency
• DO NOT use this product in wet conditions. Ensure that material to be cut is dry before starting
work, to minimize the risk of electrocution
• Use of this tool requires the use of gloves, eye/face protection, dust mask, ear defenders,
hard hat, and sturdy clothing. Chainsaws are dangerous, it is important to eliminate the risk of
blade to skin contact
• When felling trees, always plan an escape route before cutting. Ensure that there is a clear
space behind you, at least twice as far as the tree is tall. The escape route should be clear of all
obstructions
• ALWAYS keep the saw chain properly lubricated; keep covered when not in use. Ensuring
the saw chain is in good working condition lowers the risk of kickback as well as increasing the
saw chains lifespan
• ALWAYS check the workpiece for foreign objects, and the work area for fencing, cables
etc. Interaction with foreign objects during cutting increases the risk of kickback occurring. Only
use this chainsaw to cut wood. Be sure that it is safe to cut before beginning a job
• NEVER pass arms or legs below the blade when cutting. Always stand back from the cutting
area, whilst maintaining a stable position
• Be prepared for the possibility of kickback. Under some circumstances, if used incorrectly, the
chainsaw may be thrown back towards the user. Correct use and maintenance will significantly
reduce the chance of kickback occurring
• If the chainsaw jams, switch off immediately. Allow the motor to come to a complete stop
before attempting to clear jammed material
• Be aware that some wood dust is toxic. This is especially likely if you are cutting wood treaded
with stains, or preservatives. If you are unsure of what treatments your wood may have had, do
not cut
• Assess your own physical condition. Using a chainsaw, even a smaller model, is physically
demanding. Do not start a job unless you are confident that you are fit and strong enough to
complete it. Never use a chainsaw when tired, unwell, or under the influence of any kind of drugs
or alcohol
• If using a chain saw for the first time. It is recommended that the operator, as a minimum,
should practice cutting of logs on a saw horse supporting device.
• Disconnect the plug from the power source immediately. If the cable is damaged or cut.

Hedge Trimmer Safety

• ALWAYS use adequate protective equipment, including cut-resistant gloves, eye protection, solid
shoes and cut-resistant trousers when working with this hedge trimmer
• Connect hedge trimmers and other power tools used outdoors exclusively to power points
protected by a RCD
• DO NOT use the hedge trimmer in the rain or in damp conditions
• If power cord is cut or damaged, remove the mains plug from the power point IMMEDIATELY
WARNING: Failure to do so can lead to electrocution and other serious injuries or death.
• Keep hands and fingers well away from the blades
• Always hold the hedge trimmer securely with both hands on the handles when working with the
device
• Disconnect the hedge trimmer from the power supply before cleaning, removing obstructions or
carrying out maintenance. DO NOT attempt to free a jammed blade before the machine has been
disconnected from the power supply
• Disconnect the hedge trimmer from the power supply immediately when finishing work or if work
is interrupted. If you are interrupted when operating the trimmer, complete the process and switch
off before turning your attention away from the hedge trimmer
• This hedge trimmer has been designed to cut soft, new growth and should NOT be used on thick
branches, hard wood or for other forms of cutting
• This product requires the use of two hands to ensure safe operation
• Never allow untrained users or children to use the hedge trimmer
• Inspect the area to be cut before starting. Remove any objects or debris that could be thrown,
jammed or become entangled in the blades
• Adopt a stable stance always keeping the hedge trimmer in front of your body
• Grip the front handle bar switch with one hand. With the other hand grip the rear handle and with
your fingers squeeze the trigger switch
• Allow the cutting blades to reach full speed before commencing the cut
• When cutting always move in a forward direction. Never move backwards while operating the
hedge trimmer in case you could fall over unseen obstacles
• Never work towards people or solid objects such as walls, trees or vehicles etc.
• If the blade stalls during cutting, stop the hedge trimmer immediately and disconnect it from the
mains supply before investigating the cause. Remove any jammed debris from the blades and
examine them for damage before re-commencing cutting. Always replace any damaged blades.
9
GB