E) Led Headlight; Mileage Show; G) Emergency Braking; Display Factory Setting - e-TWOW BOOSTER PLUS Manual De Instrucciones

e) LED Headlight

In manual mode: Press the ON/OFF Light button when needed and there will be a sign in display
indicates the light is turn on. Press the button again when you do not need the light. Keep pressed
for a few seconds.
The scooter is equipped with a sensor light that detects the need of light. The light will turn on
automatically (auto light mode) if the sensor detects poor ambient light.
For example: when is cloudy weather and the auto light mode is on, the light turns on. If the
daylight is proper, the auto light mode detects the light and the headlights will go off after 5
seconds.
On auto light mode, the display is also lighted depending on the ambient light.
If the scooter is on auto light mode, you can go to manual mode by pushing the ON/OFF Light
Button until the sign "Auto" disappears from the screen.
When the ON/OFF light button is turned off, it will stop the front light and, also the rear stop light.
In this situation, the stop light will turn on only when the brakes are used.
f) Mileage Show
When the display is powered, it displays 2 modes: total and trip. You can change it by pressing the
settings button. In 'trip' mode, press the setting button (S) for 3 seconds and it will clear the trip.

g) Emergency braking

In case you need fast braking, it's recommended to use the foot brake

3. Display factory setting

12
10 – Headlight icon
11 – Speed
12 – Battery
13 – Temperature
14 – Displays the total or trip distance
15 - Trip total (ODO) or total mileage from the last reset (TRIP)
11
13
15
14
9