Dvd Setup; Language Setting; Display Setting - Denon DVD-1930CI Instrucciones De Funcionamiento

DVD SETUP

In Setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode are available (refer to pages 25-28).
QUICK mode consists of the setting menus frequently used, and they are accompanied with
You can make all settings in CUSTOM mode.

Language Setting

Language options are not available with some discs.
1 Press the SETUP button in stop mode.
Press the Cursor buttons (s or B) to select
2
CUSTOM, then press the ENTER button.
• The custom mode will appear.
3 Press the Cursor buttons (s or
B) to select LANGUAGE, then
press the ENTER button to con-
firm.
4
Press the Cursor buttons (K or
L) to select an item, then press
the ENTER button.
DIALOG (Default : ORIGINAL)
• Sets the audio language.
SUBTITLE (Default : OFF)
• Sets the subtitle language.
DISC MENU (Default : ENGLISH)
• Sets the language for DVD Menu.
OSD (Default : ENGLISH)
• Sets the language for the On-Screen display.
Press the Cursor buttons (K or L) to select a set-
5
ting, then press the ENTER button.
• If OTHER is selected in the DIALOG, SUBTITLE or
DISC MENU, press four-digit number to enter the code
for the desired language (refer to the language code list
on page 29).
• Only the languages supported by the disc can be selected.
6 Press the SETUP button to exit and activate the
new settings.
NOTE:
• Language Setting for DIALOG and SUBTITLE may not
be available with some discs. Then use the AUDIO and
SUBTITLE buttons. Details are on page 23.

Display Setting

You can change certain aspects of the DVD display screens,
still mode setting, Progressive and HDMI settings.
1 Press the SETUP button in stop mode.
Press the Cursor buttons (s or B) to select
2
CUSTOM, then press the
ENTER button.
• The custom mode will appear.
3
Press the Cursor buttons (s or
B) to select DISPLAY, then press
the ENTER button to confirm.
4 Press the Cursor buttons (K or
L) to select an item, then press the ENTER button.
TV ASPECT (Default : 4:3 LETTER BOX)
• Press the Cursor buttons (K or
L) for an item selection, then
press the ENTER button.
• Select 4:3 LETTER BOX for a
black bars appears on top and bot-
tom of the screen.
• Select 4:3 PAN & SCAN for a full
height picture with both sides trimmed.
• Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
• Select 4:3 SQUEEZE when the TV screen is too large hor-
izontally at 16:9 WIDE setting and when it is impossible to
adjust the screen size using the TV's controls.
LANGUAGE
DIALOG ORIGINAL
SUBTITLE OFF
DISC MENU ENGLISH
OSD ENGLISH
QUICK
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
PROG MODE AUTO1
HDMI SELECT YCbCr
HDMI P CTURE NORMAL
QUICK
DISPLAY
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
4:3 SQUEEZE
STILL MODE (Default : AUTO)
• Press the Cursor buttons (K or
L) for an item selection (AUTO,
FIELD, or FRAME), then press
the ENTER button.
• This function allows you to
adjust picture resolution and
quality in still mode.
• An individual picture on TV screen is called as "frame",
which consists of two separate images called as "field".
Some pictures may be blurred at the AUTO setting in
still mode due to their data characteristics.
• AUTO: Automatically selects the best resolution setting
(FRAME or FIELD) based on the data characteristics of
the pictures.
• FIELD: Select FIELD when the pictures are still unsta-
ble even if AUTO is selected. FIELD stabilizes the pic-
tures, although the picture quality may become coarse
due to the limited amount of data.
• FRAME: Select FRAME to display relatively motionless
pictures in higher resolution. FRAME improves the pic-
ture quality, although it may unstabilize the pictures due
to simultaneous output of two field data.
PROGRESSIVE
QUICK
(Default: OFF)
• Press the Cursor buttons (K or
L) to set PROGRESSIVE to ON
or OFF, then press the ENTER
button.
• The setting will be effective
when you exit the setup screen by pressing SETUP.
• When PROGRESSIVE is ON, P.SCAN appears on the
DVD player's display after you exit the setup screen.
• Refer to page 11 for more details.
• In the HDMI output mode, even when PROGRESSIVE
is set to ON, signals are output always as Interlace.
PROG.MODE (Default: AUTO1)
• Press the Cursor buttons (K or
L) to select a mode for the pro-
gressive scan output, then press
the ENTER button.
• AUTO1: mode suitable for
images on the film
material.
• AUTO2: mode for images on the material of 30-frame
film.
• VIDEO1: mode for normal video material.
• VIDEO2: mode for video material with less movements.
• VIDEO3: mode for video material with many movements.
HDMI SELECT (Default: YCbCr)
• Select an HDMI output mode
between YCbCr and RGB.
• When the connected equipment
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
HDMI PICTURE (Default: NORMAL)
• Select a HDMI picture mode
between NORMAL and
ENHANCED.
• Select ENHANCED if the black-
white contrast is not clear.
• This setting is effective only for
HDMI RGB output.
5
Press the SETUP button to exit and activate the new
settings.
– 25 –
QUICK
mark.
DISPLAY
STILL MODE
AUTO
FIELD
FRAME
DISPLAY
TV ASPECT 4 3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
PROG MODE AUTO1
HDMI SELECT RGB
HDMI PICTURE NORMAL
D SPLAY
PROG MODE
AUTO1
AUTO2
VIDEO1
VIDEO2
VIDEO3
D SPLAY
TV ASPECT 4 3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
PROG MODE AUTO1
HDMI SELECT YCbCr
HDMI PICTURE NORMAL
D SPLAY
TV ASPECT 4 3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
PROG MODE
AUTO1
HDMI SELECT YCbCr
HDMI PICTURE NORMAL
EN