Warranty And Liability; Copyright - Allmatic NC4 Serie Manual De Instrucciones

ALLMATIC
2.4

Warranty and Liability

All information and instructions contained in this translation of the original operating manual
are provided on the basis of our experience and to the best of our knowledge. The technical in-
formation and data described in this translation of the original operating manual are valid as at
01.07.2020. Our products are subject to continual further development. We therefore reserve
the right to implement changes and improvements which we consider necessary. However, this
does not represent an obligation to extend these to products previously supplied. Therefore, no
claims can be derived from the information and descriptions given in this translation of the ori-
ginal operating manual. This translation of the original operating manual must always be avail-
able in the vicinity of the clamping system.
2.5

Copyright

The contents published in this translation of the original operating manual are subject to Ger-
man copyright law. The translation of the original operating manual is only intended for the op-
erator and the users of the NC4 clamping systems.
All forms of reproduction and forwarding to third parties require the prior approval of the ALL-
MATIC-Jakob Spannsysteme GmbH.
All copyright infringements may have consequences under penal law.
NC4
User Information | 2
EN
43 / 376