DuPont WFRO60X Serie Instrucciones De Instalación página 7

STEP 4
Install Water Storage Tank
The Tank Ball Valve fitting on the Water Storage Tank may need to be tightened 3-4 turns to get a good seal.
Do not over tighten.
TO INST LL W TER STOR GE T NK:
1 H
pply 2-3 wraps of Plumber's Tape
2 D
Locate the Tank Connector . Hand tighten onto the Water Storage Tank
cross thread or over tighten.
3
Do not connect the tube at this time. This will occur later in the assembly.
4 E
Place the Water Storage Tank next to the Reverse Osmosis Filter System ssembly. The Water Storage Tank
be placed upright or on its side. Use provided mount stand.
STEP 5
Install RO Faucet
SELECT LOC TION OF REVERSE OSMOSIS F UCET MOUNTING HOLE
You will need to select the location of the Reverse Osmosis Faucet
Use an existing sink top hole. This may be blank. This is for the spray hose or soap dispenser
(Must be between 1-3/8" and 1-5/8" in diameter)
Drill a new hole in the sink
Drill a new hole in the countertop next to the sink
1
Determine where you are going to install your RO Faucet Body
2
Check to ensure the RO Faucet Body
3
Visually review the routing of the tubes from the RO System Head
adequate tube routing space between the RO Faucet Body
4
If drilling is needed, drill a 1-3/8" diameter hole in the mounting surface.
IMPORT NT: Drilling holes into countertops and sinks should only be performed by a qualified installer who is certified for drilling such
materials. Drilling of surfaces made of stone or solid surface materials such as granite, marble, Corian™ or other plastic resin products
or sinks made of porcelain and stainless steel may cause permanent, irreparable damage to the sink or countertop surface.
WFRO60X
to the threads on the nipple at the top of the Water Storage Tank
E
nipple 3-4 turns, being careful not to
P
. You have three options to choose from:
P
.
P
will mount flat against the mounting surface.
to the RO Faucet Body
P
and RO System Head .
4
E
E
can
5
P
. Check to ensure there is
6
D
E
P
V4.1