DuPont WFRO60X Serie Instrucciones De Instalación página 5

STEP 1
Install Kitchen Faucet dapter
CHOOSE TYPE OF W TER FITTING TO INST LL
1
Locate the cold water line in the sink cabinet. Turn off the cold water supply to the sink.
NOTE: If uncertain about which line supplies the cold water, turn on the hot water to the faucet. llow the water to heat up and carefully
feel the pipes under the sink. The pipe that remains cool to the touch is the cold water supply.
2
Turn on the kitchen faucet to release pressure and allow water to completely drain from the line.
3
Disconnect the cold water line from the 1/2" threaded stem on the bottom of the kitchen faucet.
NOTE: If rigid plumbing pipe (metal or plastic) is used, you may need to shorten the supply pipe using a hacksaw or pipe cutter to
accommodate the Kitchen Faucet dapter.
4
Holding the Kitchen Faucet dapter
5
Screw the cold water supply line to the male threads of the Kitchen Faucet dapter
water line to the kitchen faucet previously. For a secure fit, tighten the nut using an adjustable wrench.
1
RIGID W TER LINES
WFRO60X
F
in an upright position (see diagram), screw onto the threaded faucet stem.
3
F
using the nut that was connecting the cold
1
4
1
1
4
F
F
5
FLEX HOSE W TER LINES
F
V4.1