Tabla de contenido
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
RISK EXAMINATION
The points pointed by arrows
grade the past production.
breaking, being damages or accidents due to a failure to comply with the instructions herein. The guarantee will be
void and the manufacturer responsibility will be nullified if
installation shall be carried out by a professional technician who will release documentation as requested by the laws
in force.
Packaging materials such as plastic bags, foam polystyrene, nails etc must be kept out of children's reach
as dangers may arise.
Fig.24
of tests for checking the gate automations respecting the limits established by the rule EN 12453.
SAFETY GATE
For a correct and safe installation it is strongly recommended to install a Safety Gate, which allows the fulfilment of
the force diagram included in the norm EN 12453 and consequently the test and start of the whole installation.
67410019
®
in fig. 23
are potentially dangerous. The installer must take a thorough risk examination
SEA
can not be deemed responsible for any damage or accident caused by product
to prevent crushing, conveying, cutting, grappling,
trapping so as to guarantee a safe installation for people,
things and animals.
(
Re. Laws in force in the country where installation has
been made.
refer to your area distributor or call our help desk. These
instructions are part of the device and must be kept in a
well known place.The installer shall follow the provided
intructions thoroughly.
to automise doors, gates and lwings. Any initiative taken
without
SEA
manufacturer from whatsoever responsibility. The
installer shall provide warning notices on not assessable
further risks.
Fig.23
products, is allowed to make whatsoever adjustment
without giving notice. This doesn't oblige
SEA
original spare parts are not being used.
REV 00 - 07/2013
) As for misunderstandings that may arise
SEA
products must only be used
explicit authorization
SEA
in its relentless aim to improve the
I N I T I A L T E S T A N D
S T A R T I N G
AUTOMATION
After having completed the necessary
operations for a correct installation of the
Mark Tank E product, as described in this
manual, and after having valuated all
resting risks which could arise in any
installation, it is necessary to test the
automation to guaranty the maximum
security and, in particular way, to
guaranty that the laws and norms of this
sector are fully respected. Especially the
test must be executed following the norm
EN 12445 which establishes the methods
MARK TANK E
English
English
will preserve the
SEA
to up-
The electrical
O F
T H E
11
Tabla de contenido
