THOMSON DSC 723S Manual Del Usuario página 43

OUTDOOR 720P IP WIFI CAMERA
List of cameras to search: tick the cameras
9
with recordings you wish to view
Viewing windows: double-click to display one
10
or more windows and cameras simultaneously
Take a photo from the video in playback and
11
activate/deactivate sound
Type of trigger: tick the type of recordings you
12
want to search: flat (programmed), manual,
upon motion detection, by alert in general
Day you want to view
13
Position: enter the precise time from which you
14
want to view the video
To search for a video and view it:
• Click on the list of cameras on the top right of
the screen or on the cameras that you wish to
view.
• In the "type d'enregistrements [type of
recording]" area, indicate the type of
recordings that you are searching for
• In the "date d'enregistrement [date of
recording]" area, indicate the day you want to
view
• Click "Recherche [Search]": each camera
is listed at the bottom of the screen. The
coloured areas correspond to the videos in the
computer memory:
• At the bottom of the screen, click on the
cameras for which you would like to display
the videos
• Use the playback controls to play, fast forward,
rewind or use the "Positionner [Position]" area
to indicate the precise time with the cursor.
To program an alert to be sent when movement
is detected, you need 2 email addresses: the
address of the sender which will be used by
the camera, and the address which will receive
the alerts. The camera uses the username and
password of the sender address to connect and
send the email. Configuration depends on the
chosen email provider's settings.
Note: the 2 email addresses can be the same
(you will simply be sending an email to yourself)
D - CONFIGURATION AND USE
In our example here, we use www.gmail.com:
[email protected] sends the alerts,
[email protected]
Both addresses need to have been created
beforehand.
To program email alerts for motion detection,
right click on a camera in the list at the top right
of the main screen or on the screen image, then
select "Paramètres caméra [Camera settings]".
Then go to "Réseau [Network]", "Paramètres
messagerie [Message settings]":
1
www.thomsonsecurity.eu
1 Tick the "Activer [Enable]" box to enable email
sending
SMTP server: depends on the email provider
2
of address that sends the alert. In our
example, using Gmail, smtp.gmail.com
SMTP port: varies with the email provider of
3
the address sending the alert. I our example
using Gmail, 465
4
Security: security when connected to the email
provider. In our example using Gmail, TLS
Authentication: indicates whether connection
5
is compulsory (authentication) to send an
email. In our example using gmail: Yes (in other
words: you cannot send an email via Gmail if
you are not logged into your account).
receives the alerts.
2 3 4 5 6
7 8 9
17
EN EN