Tabla de contenido
Idiomas disponibles
Idiomas disponibles
/
Hinge Pin
Hole
--
Dust Bag
Chamber
Hinge Pin
Hole
Cover
To reinstall dust bag cover.
1. Align dust bag cover hinge pin with
hinge pin hole in dust container.
2. Rotate dust bag cover into place.
3. You should hear a noticeable click
when hinge pin snaps into place.
Dust Bag
Cover
To maintain efficient cleaning, the agitator
must be kept free of carpet fiber, string, or
hair build-up. After every 7 to 10 uses, un-
plug and turn vacuum cleaner over and
check agitator for fiber and hair build-up.
Use scissors to remove any build-up
entan-
gled around the agitator.
Always follow all safety precautions when
performing
maintenance
to the vacuum
cleaner.
_IbWARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance
to the vacuum
cleaner. Failure to do so could result in
electrlcal shock or personal injury from
the vacuum cleaner suddenly starting.
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bag is full or if a filter isclogged. See
DUST BAG REMOVAL AND REPLACEMENT
(Page 18-19)
If the dust bag and filter areas are free of
clogs, check the clean-out port and the
extension hose. See the following sets of
instructions.
= 21 =
Capítulos
Tabla de contenido
