Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNING
Electrical Shock And Personal Injury
Haz-
ard
Disconnectelectrical supply before per-
forming maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
4. AGITATOR OVERLOAD
PROTECTOR
The agitator has built-in protection
against motor damage should the
agitator jam. If the agitator slows down
or stops, the agitator overload protector
shuts off the agitator
motors. The vacuum
cleaner suction motor will continue to run.
To correct problem: Turn off and unplug
vacuum cleaner, remove obstruction, then
press AGITATOR RESETBUTTON.
NOTE:
Once the agitator
motor
shuts
down,
clear jam from agitator
and
wait a minimum of 20 seconds before
resetting
overload
protector.
If the problem
persists, have the vacuum
cleaner
serviced
by a Sears or other
qualified
technician.
DIRT SENSOR
The electronic dirt sensor is a feature
which will detect particles as they pass
through the vacuum cleaner.
The dirt sensor indicators are located on
the nozzle of the vacuum cleaner.
* When little or no dirt is present the
dirt sensor is green.
* With medium or heavy concentration
the dirt sensor is red.
OPERATION
As you vacuum, the red indicator light
will come on and stay on as long as the
sensor detects a high concentration
of
particles passing through the vacuum
cleaner.
a 16 a
Capítulos
Tabla de contenido
