Werner R430006 Instrucciones Para El Usuario página 26

DUAL-LEG CONFIGURATIONS:
1. When
confi guration, make sure to maintain
100% tie-off at all times. ALWAYS
maintain one engaged snap hook
or rebar hook attached to an
appropriate anchorage connector,
while hooking disengaged snap
hook or rebar hook.
2. Unclip plastic keeper and slip it off
gate. See fi gures 1 and 2.
3. Open gate and connect fi rst SRL
unit. Move connection point around
connector. See fi gure 3.
4. Hook
webbing straps on the back plate:
follow the path of the back D-ring.
See fi gure 4.
Page 2
using
dual
leg
connector around
SRL
both