DIEL ME100 V2 Manual De Instalacion Y Uso página 16

ENGLISH
the device executes a display test and the system is prearranged in
automatic way and visualises the maximum measured temperature
and the relative channel.
DATA VISUALIZATION
Referring to F it is possible to show all parameters of interest by
buttons UP and DOWN. To show one specific parameter, or one
specific measure of temperature, select it and push the button
AUTO/MANUAL, the MANUAL LED turns on to flag a manual
status mode. To return to the normal automatic mode push again
AUTO/MANUAL button.
During automatic working the higher temperature and the relative
number of channel appear on display. To visualize the maximum
values of the machine push and hold the buttons AUTO/MANUAL
and ENTER/TEST at the same time. The visualisation of
the
maximum temperatures is signalised through the LED PROG-
TMAX which is placed on the front-end panel.
With the buttons UP and DOWN it is possible to see the historical
maximum temperature achieved by all active channels. For exit
push button AUTO/MANUAL.
Please note that the maximum values are reset every time you
confirm a new program sequence.
TEST RELAYS
Pushing ENTER/TEST, the device performs a display test, pushing
and holding the same buttons, the device enter in test relays mode.
With the buttons UP and DOWN it is possible to switch a relays
state. To test the other relays, push ENTER/TEST button, to exit
push AUTO/MANUAL button.
16