AGP C16 Instrucciones De Seguridad página 12

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
FLUSH CUTTING KIT INSTRUCTIONS (Model C16 only)
The flush cutting kit enables a flush cut blade (not included) to be
mounted to the machine which allows flush cuts to be made while
the outer blade guard is temporarily removed. The flush cut blade
may be left in place and the operator may return to standard cutting
simply by replacing the outer blade guard and securing with the 3
toggle latches. In this way, it is quick and convenient to switch
between standard and flush cutting mode. Or if desired, the flush
cutting blade and flange may be removed and the machine returned
to the standard configuration.
FLUSH CUTTING KIT LIST OF CONTENTS
1. Flush Cutting Flange
2. Socket Cap Arbor Bolt & Washer
3. Flat-Head Socket Cap Screws x 6
4. M5 L-Hex Wrench
5. M8 L-Hex Wrench
FLUSH CUTTING KIT ASSEMBLY
To mount the flush cutting kit, first remove the standard arbor bolt, flanges and blade .
1.
Mount the flush cutting flange on the spindle and secure with the washer and socket cap arbor bolt.
Engage the arbor lock tighten the arbor bolt securely using the M8 L-hex wrench.
2.
Mount the flush cut blade on the flange, align the holes and thread in the flat-head socket cap screws.
Using the M5 L-hex wrench, tighten the screws evenly and diagonally.
FLUSH CUTTING KIT OPERATION
1.
Remove the the water hose from water nozzle on the outer blade
guard and connect it to the alternate water nozzle on the inner
blade guard.
2.
Remove the 6 screws securing the outer blade guard .
3.
Unclip the 3 toggle latches and pop the loose hasps in the plastic
clips to prevent rattling.
4.
Lift away the outer blade guard and keep in a safe place.
5.
Once the flush cutting operation is completed, immediately
replace the outer blade guard and water hose.
WARNING: Always operate with the outer blade guard in place while performing standard cutting.
Never operate the saw with the outer blade guard removed except for flush cutting operations.
WARNING: Check the tightness of the mounting screws and arbor screw periodically.
WARNING: If any unusual vibration is felt in operation, stop immediately and find the cause before
GB
Flat-head Socket
Cap Screws
Alternate Water Nozzle
12
Toggle Latches
Tabla de contenido
loading

Productos relacionados para AGP C16

Este manual también es adecuado para:

C14

Tabla de contenido