Operation Of The Display; General Information Of The Display; Functions Of The Display's Buttons - Bio Bronpi Aire Serie Instrucciones De Instalación, Uso Y Mantenimiento

CLEANING TASKS
Remove the burner from the chamber and clean the holes with the use of the poker provided. Remove the ash with
a vacuum-cleaner.
Hoover the ashes which are inside the burner place.
Operate the scrapers doing a movement from down to up several times. (**Only models provided of its)
Empty the ash pan or vacuum the ash compartment when necessary.
Vacuum the bottom of the pellet tank when necessary.
Clean the internal of the combustion chamber descale in the walls with a correct vacuum cleaner.
Clean the smoke extractor fan, the whole combustion chamber, pellet tank, whole replacement of the seals and
put again silicone where necessary, smoke duct, reservoirs...
Check all the electronic components (electronic board, display...)
Check all the electrical components (resistance, smoke extractor fan, circulator pump).
9

OPERATION OF THE DISPLAY

9.1

GENERAL INFORMATION OF THE DISPLAY

The display shows information about the stove performance.
Once you access to the menu, you will see different screens and
configurations according to the level of access.
Depending on the working mode, the display may have different
meanings depending on the position in the screen.
Drawing D27 shows an example of a stove off.
Drawing D28 shows the layout of the messages during the
programming or configuration of the working parameters.
Particularly:
1. The screen area saying "VALUE" shows the value that we
introduce.
2. The screen area saying "MENU LEVEL" shows the current
menu level.
Drawing D29 shows the meaning of the symbols appearing on the left hand
side of the screen. The screen lighting in the section "status" shows the
activation of the corresponding device according to the following list.
9.2

FUNCTIONS OF THE DISPLAY'S BUTTONS

Button Description
Increases
1
temperature
Decreases
2
Temperature
3 Menu (Set)
ON/OFF
4
Unblocking
5 Decreases power
Increases power
6
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Modality Performance description
PROGRAMMING Modifies/Increases the value of the selected menu.
ON/OFF Increases the ambient thermostat temperature value.
PROGRAMMING Modifies/Increases the value of the selected menu.
ON/OFF Decreases the ambient thermostat temperature value.
- Access the menu.
MENU Access the following level in the submenu.
PROGRAMMING Confirms the selected value and move to the following option in the menu.
WORKING It switches on or off the stove pressing 2 seconds.
BLOCKING Unblocks the boiler and switches it off.
MENU / PROGRAMMING Goes back to the previous level menu and saves the modified data.
ON/OFF Decreases the output value of the stove.
MENU Moves to the previous menu option.
PROGRAMMING Goes back to the previous submenu value.
ON/OFF Increases the output value of the stove.
MENU Moves to the following menu option.
PROGRAMMING Moves to the following submenu option.
VALUE
STATE
VALUE
STATE
PROGRAMMING ACTIVATED
RESISTOR
AUGER
SMOKE EXTRACTOR
EXCHANGER
CIRCULATOR PUMP (ONLY HYDRO MODELS)
ALARM
30
√
√
√
√
√
√
AMBIENT TEMPERATURE
14:24
21 ºC P-2
OFF
DIALOGUE POWER
MENU LEVEL
DIALOGUE
√
√
√
√
√
√
√ √
√ √
√ √
D27
D28
D29
AIR SERIES