Switch On; Switch Off; Standby Mode; Diopter Adjustment - Liemke KEILER–13 PRO CERAMIC Manual De Instrucciones

06. SWITCH ON

> Turn on the device by pressing the Power button or 3 seconds.
The start-up screen appears, the infrared image comes on after
several seconds. The green LED indicator lights up continuously.

07. SWITCH OFF

> Switch off the device by long pressing the Power button for 3
seconds.

08. STANDBY MODE

To increase the battery life, the device can be put into standby
mode.
> When the device is on, short press the Power button to enter the
standby mode.
The green indicator light will flash every 3 seconds.
> Short press the Power button again to wake up the device from
the standby mode.
Waking up the device is instant, there is no waiting time compared
to switching on the device after it has been switched off completely.

09. DIOPTER ADJUSTMENT

The diopter adjustment adjusts the eyepiece of the device to the
individual user's eyesight.
> Close the lens cover and turn the eyepiece/diopter adjustment
clockwise or counterclockwise until the symbols on the display
appear clearest for your personal eyesight.

10. SWITCHING THE IMAGE MODE

> Short press the Image Mode button to switch the image mode
from white hot, black hot, red hot, false color and target high-
light mode.
01.
01. White Hot - ideal for accurate identification
02. Black Hot - ideal for quick spotting
03. Red Hot - for fast detection of heat sources
04. False Color - for detection at close range, for example thermal
bridges
05. Target Highlight - reduces the overall brightness and thus glare

11. DIGITAL ZOOM

> Short press the Zoom button for image zooming from 1× to 2×, 4×
(Keiler-18 Pro Ceramic) or from 1× to 2× (Keiler-13 Pro Ceramic)
and back to 1×.
02. 03. 04. 05.