Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Head line replacement
Fuel filter
• Fuel tank is fitted with a filter. Filter is situa-
ted at the free end of fuel pipe and can be
picked out through fuel port with a piece of
hooked wire or the link.
• Check the fuel filter periodically. Do not allow
dust to enter into fuel tank. Clogged filter will
cause difficulty in starting engine or abnor-
malities in engine performance.
• When filter is dirty, replace the filter.
• When the inside of the fuel tank is dirty, it
Owner's manual
can be cleaned by rinsing the tank out with
gasoline.
Spark plug
• Do not attempt to remove the plug from a hot
engine in order to avoid possible damage to
the threads.
• Clean or replace the plug if fouled with hea-
vy oily deposits.
• Replace the plug if the center electrode is
worn rounded at the end.
•Spark gap 0.6-0.7mm (.023" . 028")
•Fastening torque =14-15Nm( 125-135in.lb)
Bevel gear
After working (40-50) hours, fill with the right
quantity of grease. Remove the screw and put
in the lithium-based grease. Turning the shaft
manually until grease emerges, then refit the
wash the screw.
Adjusting carburetor note
Do not adjust carburetor unless necessary.
If you have trouble with the carburetor, see your
dealer. Improper adjustment may cause engine
damage and void warranty.
English
37
37
Tabla de contenido
