Aiwa AV-D50 Manual De Instrucciones página 11

SELECTION OF AUDIO/VIDEO
SOURCE
1
1 Select the program source.
Press one of the function buttons or the TAPE MONITOR
button.
I Radio I TUNER
I
I Record I PHONO
I
I Television, etc. I AUX
I
I Conmact disc I CD
I
I
Video
VIDEO 1/5.1 CH, VIDEO 2,
VIDEO 3
I
I LD or Cable TV \ VIDEO 2
I
@or DVD I VIDEO 1/5.1 CH
The function buttons to be pressed (except PHONO) depend
on the equipment connected to the input terminals on the
rear panel of the unit.
mm
When using a turntable with a built-in equalizer amplifier, set the
switch of the equalizer amplifier to off. See the instructions of
the 'turntable for further information.
2 Start the
selected program source.
3 Adjust
the sound.
About the video source to the monitor orTV
Selected VIDEO source
VI. VIDEO 1, V2: VIDEO 2, V3: VIDEO 3
To change a displayed name for the VIDECI 115.1 CH
button and VIDEC) 2 button
When the VIDEO 1/5.1 CH button is pressed, \/l DEO 1 is
displayed initially. It can be changed to DVD or MD
With the power on, Ipress the POWER button while pressing the
VIDEO 1/5,1 CH button.
This VIDEO 1/5.1 CH button also works as the 5.1 CH (5.1
INPUT)
function
switch.
While
the selected
function
name
(VIDEO 1, DVD or MD) for the VIDEO 1/5.1 Cl+ button is
displayed, press the button again. The funcl.ion name will change
to "5,1 CH" and the source connected to the 5.1 lNPLJTterrminals
is selected.
To resume, press the button again so that the selected function
name is displayed.
The displayed name for VIDEO 2 button can be changed tcl
VIDEO 2, LD or TV; with the power on, press the POWER buttorl
while pressing the VIDEO 2 button.
To adjust the soured level of the connected source
The input sensitivity level of each function (except the TUNER
and 5.1 CH functions) can be adjusted.
When the sound level of the connected source is higher or lower
than that of the TUNER, adjust it as follows.
1
2
Select the function 'm be adjusted.
Press the function button accordingly and play the source.
Press the IJPAA or DOWNV button repeatedly.
The level can be adjusted between -6dB (MIN) and -1-8dB (MAXI
in 2dB steps. Adjust the level so that the sound is cwtput at the
same level as the TUNER.
m
* The input sensitivity level of the TUNEF? or 5.1 (CH function
cannot be adjusted.
That of the TAPE MONITOR cannot be adjusted either.
Even if the TAPE MONI"TOR is selected andl the l-APE
MONITOR indicator turns red, pressing the UPAL or DOWNY'
button will change the level of the function displayed on the
window.
The selected video source is indicated on the display and the
video signal through the MONITOR VIDEO OUT jack is output
on the TV.
fWGL/SH
1()