Adding Accessories - Angelcare AC320 Manual Del Propietário

ALERTS ICONS
1 1
1
Sensor Pad alert: If after 20 seconds
1
there is NO movement detected both the
Parent Unit and Nursery Unit speakers will
emit loud consecutive beeps - this is the
movement alarm
Sensor Pad is paused
2
Sensor Pad lost link: Parent Unit and
3
Nursery Unit speakers will emit loud
consecutive beeps
Sensor Pad battery is low: Parent
4
Unit will emit 3 consecutive beeps, every
5 seconds
Note: Press any key to stop alarm and make the alert icon disappear
In the case of a Sensor Pad alarm, the monitor will Pause the Sensor Pad. In Pause mode, the
movement detection feature is disabled. To reactivate the Sensor Pad, simply un-pause the
Sensor Pad into the first menu

6- ADDING ACCESSORIES

Your Angelcare monitor allows you to add an additional Nursery Unit and Sensor Pad. Please contact
your local distributor to see what is available in your country
IMPORTANT:
• When using two Nursery Units you will only be able to hear audio from one Nursery Unit at a
time (Nursery Unit sound transmitted is highlighted in the info bar). In split screen, the sound
transmitted from the Nursery Unit will be indicated on the screen by a speaker icon shown to
the right of the CAM icons
• When using two Sensor Pads with one Monitor, it is recommended that each Sensor Pad is
located in separate rooms
7- TROUBLESHOOTING
TAKING CARE OF YOUR RECHARGEABLE BATTERY
• Ensure that you fully charge your battery for 8 hours before its first use.
• To maintain maximum battery life, it is recommended that you fully discharge your battery periodically. If your
Parent Unit is not in use, please turn it OFF.
1
2 3
1 1
4 5
Parent Unit is out-of-range: Parent Unit will
5
emit 2 consecutive beeps, every 10 seconds
Temperature is too hot: Parent Unit will emit
6
3 consecutive beeps, every 5 seconds
Temperature is too cold: Parent Unit will
7
emit 3 consecutive beeps, every 5 seconds
1
6 7
11
E
N