Part Names And Functions - Epson OT-SC20 Manual Del Usuario

Tabla de contenido

Idiomas disponibles

❏

Shut down the product immediately if water or other liquid spills into this product.

Continued use may cause electric shock or fire. Immediately unplug the product, and

contact your dealer or a Seiko Epson service center for advice.

❏

Do not disassemble the areas other than those mentioned in this manual.

❏

Never repair this product. Tampering with this product may result in injury or fire.

❏

Do not use this product in an environment where flammable gas or explosive gas may

exist. Do not use aerosol sprayers containing flammable gas inside or around this

product. Doing so may cause fire.

❏

Do not connect cables in ways other than those mentioned in this manual. Doing so

may cause fire. It may also damage other devices.

❏

Do not touch the areas inside the product other than those mentioned in this manual.

Doing so may cause electric shock or burns.

CAUTION:

❏

Do not install/store the product in an unstable location or in a location subject to

vibration from other devices. Equipment may fall or collapse, causing breakage and

possible injury.

❏

Do not allow anyone to stand or place heavy objects on top of this product. Equipment

may fall or collapse, causing breakage and possible injury.

❏

Install the printer, cables and optional products in the proper direction according to the

proper procedures. Failure to install correctly may cause fire or injury. Follow the

instructions in this manual to install them properly.

❏

Be sure to disconnect all the cables from the product before you move it. Otherwise the

cables could be damaged, potentially resulting in electric shock or fire.

Cautions on the Power Supply

Read the manual supplied with the AC adapter carefully before using the accessory AC adapter.

This product uses a listed power unit marked "Class 2" or "LPS," with the output voltage of

maximum 1.5 A at DC 24 V.

With the optional AC adapter (Epson AC Adapter, C), the output voltage is maximum 1.5

A at DC 24 V, and the input voltage is AC 100 V to 240 V.

WARNING:

Be sure to use the specified AC adapter (Epson AC adapter C, model: M235A or

M235B). Using any other power supply could cause faults, fire or electric shock.

Unpacking

When you unpack the charger, check that all its accessories are present and that there is no

damage to it or the accessories. If there are any missing or faulty items, contact the dealer

you bought the product from.

❏ Single charger (OT-SC20)

❏ OT-SC20 User's Manual (this manual)

* May not be included depending on the printer model.