Installation and connection
1. This appliance was designed exclusively for domestic use.
2. The oven in question was designed to be a fitted appliance.
3. Observe the special installation instructions.
4. The appliance can be installed in a wall-mounted cupboard in heat-resistant material,
with a width of 60 cm (at least 55 cm deep and at least 85 cm from the floor).
5. The appliance is fitted with a plug and simply needs to be connected to correctly
installed socket, which in turn should be fitted with an earthing system.
6. The mains voltage must correspond to the voltage specified on the appliance
rating plate.
7. Socket installation and connection cord replacement procedures must be carried out
exclusively by a specialised electrician. If, after installation, the plug is no longer
accessible, an omnipolar disconnection device should be fitted on the side on which the
appliance is installed, which guarantees a free space for the contacts of at least 3 mm.
8. Use of adapters, multi-socket power strips and extension cables is absolutely
prohibited. Any current overloads could, in fact, cause fires to start.
Accessible surfaces can become very hot during use.
33
Der Koch