Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Failure to meet codes and ordinances could lead to fire or
electrical shock.
Proper installation is your responsibility.
Contact a qualified installer to ensure that the dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.
Install the dishwasher as specified in these instructions.
Have everything you need to properly install dishwasher.
Avoid damage from freezing to dishwasher and water lines
leading to dishwasher. Damage from freezing is not covered
by the warranty.
This dishwasher is manufactured for indoor use only.
Install and level dishwasher on a floor that will hold the weight,
and in an area suitable for its size and use.
Product Dimensions
24"
(61 cm)
¹⁄₄
19
"
(48.9 cm)
Cutout Dimensions
Preferred Utility Area
³⁄₈
23
"
(59.5 cm)
33³⁄₄"
(85.7 cm)
NOTE: All holes should be drilled at 1½" (3.8 cm) diameter.
¹⁄₂
1
"
(3.75 cm)
Installation Clearances
24"
(61 cm)
¹⁄₂"
(1.3 cm)
25"
(63.5 cm)
A. Left-hand or right-hand water connection route
B. Left-hand or right-hand electric connection and drain route
Water Supply Requirements
A hot water line with 20 to 120 psi (138 to 862 kPa) water
pressure.
120°F (49°C) water temperature at dishwasher.
Flexible stainless steel braided fill line (½" minimum plastic
tubing is not recommended).
24"
33⁷⁄₈"
(61 cm)
(86 cm)
A
B
8"
(20.3 cm)
5
Tabla de contenido
