Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Pliers
Phillips screwdriver
Flat-blade screwdriver
³⁄₁₆" and ¼" nut drivers or
hex sockets
Measuring tape or ruler
1½" hole saw bit
Parts Needed
A
A. 72" (182.9 cm) flexible water supply line
B. Zip tie
C. Appropriate sized UL Listed wire connectors (2)
†®TORX is a registered trademark of Acument Intellectual Properties, LLC
4
INSTALLATION REQUIREMENTS
10" adjustable wrench
Utility knife
Level
Cordless drill
¹⁄₈" drill bit
Security T-20 TORX
(on some models)
Tools and Parts
Parts Supplied
Check that all parts are included.
A
E
®†
driver
B
C
M
A. ³⁄₄ " UL Listed/CSA Approved
strain relief
B. 1.25" hose clamp
C. Mounting bracket screws (8)
D. Unit mounting screws (4)
E. Drain hose connector
F. Mounting brackets (4)
G. Drain connector spring clamps (2)
C
B
F
I
G
J
K
N
H. Trim strips (2)
I. Toe kick brackets (2)
J. Toe kick bracket screws (2)
K. Toe kick trim
L. Panel fasteners (on some
models) (2)
®†
M. TORX
screws (on some
models) (10)
N. Drain hose
D
H
L
Tabla de contenido
